|
|
Modeller Build Logs
Scammell Pioneer R100 |
| By Alex Hill | | Started: | Sep 18, 2004 | | Updated: | Jan 31, 2005 |
|
The Scammell Pioneer must surely rank as one of the most charismatic military vehicles. Having been around in various guises since 1927, many Pioneers are still earning a living as show-mans wagons and recovery trucks, so the design can probably lay claim to the title of longest serving vehicle as well.
This kind of longevity only comes from good solid engineering and strokes of genius from the designers at Scammells’ Watford plant and Gardners’ Manchester engine factory. In many ways it was the fitting of the Gardner 6LW power unit to the Pioneer that made the vehicles reputation for soldier proof reliability. The engine featured advanced (at the time) lubrication and injection systems. Combined with Scammells’ transmission and static, non-pressurised, cooling system (hence the ‘coffee pot’ radiator), Pioneers could be expected to give a hundred thousand miles of trouble free running. Most of Gardners’ competitors were struggling to produce an engine that would pass one third of that mileage without at least needing the main bearings replaced. The attention to longevity didn’t stop there. The winch mechanism is something close to a work of art. At a time when a winch was basically an overgrown cotton reel hitched to the vehicles’ p.t.o, the Scammell employed every trick in the book (to be covered in more detail in later chapters) to ensure the winch rope was never kinked or over stressed.
Truly a magnificent machine with a capacity to invoke a sentimental fondness that means there will probably still be a handful of Pioneers earning their living on (or off!) the road in fifty years time when most of the current crop of M.V’s are relegated to gathering dust in museums.
Which brings me to my (hopefully never-ending) quest to build the perfect 1/35 Pioneer. The kit is of course the excellent Accurate Armour rendition of the R100 artillery tractor. In my BLOG I’ll be adding as much detail to the base model as I can, improving those parts which can be improved upon and making one or two changes just to illustrate the differences which were built in during the Pioneers’ production run. Of course an artillery tractor needs something to hang of the rear hitch, so I’ll be adding Accurate Armours’ 7.2’’ Howitzer.
|
|
|
|
| Chapter 8 - Tracks | Dec 24, 2004 |
I’d decided to add the overall tracks at the beginning of this project, but once I’d started wrestling with A.As’ photo etch kit I began to think I had made a mistake. I’m happy to accept the problems made be down to me, but if anybody has built these things and found it easy, please let me know what the secret is!
The first problem is that whatever I did with pliers, Hold and Fold and clamps, I could not bend the channels in the links to a satisfactory shape that was big enough for the chain supplied. Using a smaller gauge of chain would have meant there were too few links between track sections. The only way around this was to cut the channels off altogether and replace them with items home made with brass sheet. Very tedious work.
Secondly, the length of A.As’ pattern just isn’t right. There is one complete link too many and getting the tension right means two sections of track end up too close together.
My third gripe is that the width of the links does not allow for the weighted wheel effect. As a result the tracks at the bottom ends up a bit distorted.
Ease of assembly has always been one of the best things about A.A kits, so it’s a pity these tracks are a bit of a nightmare.
(Those following this BLOG may have noticed a bit of an improvement in the photography this chapter- credit must go to my new light cube and a lot of helpful advice from Jay Laverty of T.L and Hannants).
|
 |
|
|