|
|
Modeller Build Logs
Char B 1 bis |
| By Michael Bedard | | Started: | Jun 17, 2006 | | Updated: | Apr 20, 2007 |
|
Well I finally got the Tamiya Char B in hand and I am anxious to get it started. At the start of this BLOG there are no aftermarket kits available for the kit. I will, oh is it possible, build the kit out-of-the-box. Paul sent to me a reference book written both in French (for Ontario Canadians) and English (for all of us south of the border).
My ambition with this build is tom see if there are any quirks about the kit and show how I build up a kit. If any after market kits appear after the build is started I may add them.
It never fails for me. When I spend big bucks on a resin kit, avoid starting it and then finally decide to build it a plastic kit comes out. I bought MB Models Char B back in 1989 at an IPMS national. I held on to it until about 1992 and decided to start it. It has been sitting around since then waiting to be finished. Each year in January I go through my stash of kits and list 'to do' for the year. Well I decided to pull out the ole MB kit and make it a 'to do' kit this year. Wouldn't you know it, Tamiya (of all companies) comes out with one in plastic. To start out this BLOG I have posted what the MB kit looks like and at what stage it is. Well a Char B is on the 'to do' list but I'm pretty sure it won't be th MB Models kit.
|
|
|
|
| Adding Mud | Apr 17, 2007 |
This is probably the most favorite part of finishing for me. First picture shows the materials I use to create the mud. I make a mixture of Hudson & Allen mud. Gamblin pigments, static grass and PollyScale airbrush thinner. A final addition for looking damp is using turps and linseed oil.
Steps are:
1) To apply large dabs of mud
2) Use paint thinner to spread and feather edges of mud
3) When dry, dampen area with Turpenoid (oderless artist's turpentine)
4) For larger clumps add linseed oil. The more layers of linseed oil you add the damper and gloosier the mud because without that too glossy shiny look. The turpentine helps feater the edges so the dampness isn't too harsh.
5) final steps is to blend in areas with dry pigment once all the solutions are dry.
I will use basically the same method for heavy grease stains but add a bit of black pigment to the built up residue. |
 |
|
|