|
|
Modeller Build Logs
Tristar Panzer 38(t) Ausf B |
| By Brian Bocchino |
| Started: | Aug 14, 2007 | | Updated: | Sep 22, 2007 |
|
German Panzer Kpfw 38(t) Ausf B / Panzerbefehlswagen Pz BfWg 38(t) Ausf B
When Paul Owen offer me a chance to do a BLOG I jumped at the chance hoping that it would kick start me into building on a more active basis by having made a commitment. The kit is number is Tristar 026, Tristar Pz 38(t) Ausf B. The kit can be built as either a regular line tank or as a Command version.
When the kit first arrived, I admit to being a little disappointed at such a tiny box. However, Tristar has packed the box fairly full of parts. Inside are approximately 300 parts, a small fret of Photo Etch (PE), 200+ individual track links, and a small sprue of clear visor parts. Paul also sent me a Lion Marc barrel, product number LM10007 to use in the build.
As customarily for me, I start by looking over the instruction sheets taking note of optional parts, general flow of the construction, and places where I intend to deviate. Beyond the option for the command variant, there are not many optional areas. What does exist is an option between On Vehicle Equipment (OVE) or Stowage boxes which includes two sets of fenders depending on which option you choose. Also is the option of smoke launchers and either open of closed visors for the driver and gunner/radio operator.
For my build, I will use the OVE in favor of the stowage boxes, open visors, and no smoke launchers.
Next up: General Tools.
|
|
|
|
| Chapter 2: The Dreaded Flat Panel Hull | Sep 22, 2007 |
| Step 2 is the construction of the lower hull. It consists of putting together 5 panels to form the hull, an outer armor plate with 2 small side plates along the drive sprockets, an access hatch to the transmission area, and 2 front towing hooks. For the purpose of my build, the towing hooks will stay... more |
| Construction of the Wheels and Suspension | Aug 17, 2007 |
Step 1 in the construction instructions involves assembling the road wheels, suspension, sprockets, idler wheels and support return wheels. Many of these parts are tiny and often the attachment point of to the sprue is thicker than the parts themselves. Exercise care in their removals.
The Road... more |
| General Tools | Aug 14, 2007 |
Chapter 1: General Tools.
Most modelers the world over use the same basic tools, but here are my primary ones.
For cement, my choice is Tesotrs liquid glue along with an old paint brush for the application.
I use an angled Xuron cutter for the removal of attachment points, and a wire cutter,... more |
|
|
