|
|
Modeller Build Logs
SAS Land Rover 110 DPV |
| By James Wechsler | | Started: | Sep 26, 2007 | | Updated: | Feb 9, 2008 |
|
When Paul asked if any one was interested in writing a blog, I offered but my requirement was no more Shermans! Instead I proposed this project because I thought it would be an interesting subject and I haven’t seen a blog of a wheeled vehicle for some time.
The Land Rover 110 DPV is the most current version of the famous SAS Land Rovers that include the more well known ‘Pink Panther’. This version is based on the Defender 110 commercial Land Rover. It is still in service with the SAS seeing action in both Afghanistan and Iraq along with other not named place around the world.
The build will use the following kits:
Accurate Armour LR009 SAS Land Rover 110 DPV
Accurate Armour FS11 SAS 110 DPV Crew Set #1
For reference, I’ve found a few photos on the internet and in some publications but the main source is this new book:
Military Land Rover, Development and in Service, Pat Ware, ISBN 0711031894, from Ian Allan Publishing
This is a new book that covers all of the Land Rovers in military service and is quite detailed and well written. A must for all Land Rover enthusiasts.
In addition, I spent some time in a commercial version of the Defender 110 this summer and took a lot of notes on some of the details. It may not seem it, but it’s a pretty large vehicle, bigger than most SUVs but a bit smaller than a HUMVEE. |
|
|
|
| Decals and Dash Board | Jan 13, 2008 |
| Accurate Armour provides a small but comprehensive decal sheet. Mostly there are small placards and stencils. In addition the various dials and gauges for the dashboard are also provided as decals. They work quite well but I felt that just using a decal for the main dash board wouldn’t provide enough of a three dimensional look. So I made an overlay that offset the dials. After weathering, I’ll fill in the dials with some epoxy to represent the glass covers. The overlay was made from 0.015 inch clear plastic sheet. I did this so I could easily lay it over the decal sheet and mark where to punch out the holes for each dial. It took two tries but that turned out to be a quick process. I then just painted it the same tan color as the rest of the interior. |
 |
|
|