|
|
Forums - Modelling / Construction |
The construction forum is for the discussion of techniques on the construction phase of AFV modelling and the tools and materials used. |
| Topics | 1841 |
| Messages | 8501 |
|
|
| Subject: | What are you using to slice them off? |  |
| Date: | Dec 11, 2007 |
| From: | Jason Burch | |
If you are using an exacto knife blade, thats your problem. Use a single edge razor blade, its much thinner and sharper, and will cause less curling. A slight rocking motion will help it slice through with less resistance, and cause less distortion. It will also slice through your finger quite easily as well, so take it slow!
HTH
Jason |
| |
|
|
|
