|
|
Forums - Modelling / Construction |
The construction forum is for the discussion of techniques on the construction phase of AFV modelling and the tools and materials used. |
| Topics | 1836 |
| Messages | 8464 |
|
|
| Subject: | Re: Removing sprue numbers for casting #s |  |
| Date: | Dec 16, 2007 |
| From: | Paul Roberts | |
To be honest, I've never had a problem using a nice sharp #11 blade. If the letters are a bit curled, gentle pressure will get them mostly flat and then the liquid cement will take care of the rest. Use repeated applications of a little glue with gentle pressure to get them to lay down to the substrate.
Let's face it, you don't need to read them well enough for your last will & testament, just a hint of the numbers is more than good enough. :-)
Paul |
| |
|
|
|
