|
|
Forums - Modelling / Construction |
The construction forum is for the discussion of techniques on the construction phase of AFV modelling and the tools and materials used. |
| Topics | 1893 |
| Messages | 8728 |
|
|
| Subject: | Re: 2-piece gun barrels? |  |
| Date: | Mar 8, 2003 |
| From: | Mike James | |
| Glue the pieces and clamp with clothes pins. When dry scrape the seam with your knife, then run a small bead of Crazy Glue or similar along the seam (use a small piece of wire or similar). Let dry then sand with 320-grit, followed by 400-grit. Perfect barrels every time! Cheaper than the aftermarket stuff too... |
| |
|
|
|
