|
|
Forums - Modelling / Construction |
The construction forum is for the discussion of techniques on the construction phase of AFV modelling and the tools and materials used. |
| Topics | 1893 |
| Messages | 8729 |
|
|
| Subject: | Re: M1A1/2 Sponsons |  |
| Date: | Dec 25, 2004 |
| From: | Alan Eaton | |
Depends, For the first few feet, basicly up to the end of the front slope, just sheet metal. Once you get past the first 5 feet or so, its plated in all the wat to the back of the tank flush with the bottem of the upper side plate. Where the sponson is next to the engine compartment, there is (on both sides) a fuel cell that leads into the primary rear fuel cell. Which, if you throw track in just the right way... you can puncture through the half inch plate and punch the cell open. :)
Not that I ever done that...
really...
well..
Ok. Its black plastic, and its a pain in the rear to clean up after. :) |
| |
|
|
|
