|
|
Forums - Modelling / Construction |
The construction forum is for the discussion of techniques on the construction phase of AFV modelling and the tools and materials used. |
| Topics | 1893 |
| Messages | 8727 |
|
|
| Subject: | to answer your question... |  |
| Date: | Dec 11, 2005 |
| From: | Gary Edmundson | |
Hi Eric,
I've always tried not to get spurs by using the sharp Xacto blade method, but if I get the odd one - I secure the p.e. piece length-ways in a pair of tweezers and hold it with as little protruding as possible. Using either a sanding stick or file, I gently wear the spur down flush with the edge of the piece, again - in a lengthwise direction using one pass at a time, not back-and-forth.
Good luck & cheers,
Gary |
| |
|
|
|
