|
|
Forums - Modelling / Construction |
The construction forum is for the discussion of techniques on the construction phase of AFV modelling and the tools and materials used. |
| Topics | 1893 |
| Messages | 8727 |
|
|
| Subject: | Re: ABER PE clasps |  |
| Date: | Mar 15, 2001 |
| From: | Jean-Baptiste Verlhac | |
Hi Lance
Here is the to method I use:
The quiet one (when you havn't drink too much coffee):-bent the upper part and insert it in the bent handle (that's not so tricky). Now the most difficult is to insert the lower part whitout removing the upper one. With a little patience it works. You can secure the assembly with cyano.
-Easier method using Tamiya tape:
You assemble the on the SIDE, Put the handle ( not bent) on the adhesive tape , then put the bent upper and lower part into the holes (on the side (the surface contact with the adhesive is not important but that's enough to secure the assembly before the last step). Then whith an X-acto blade, bend the handle securing the portion that will remain on the tape with another X-acto blade. You bend the handle until the axles are in position.
Hope this helps |
| |
|
|
 | ABER PE clasps - Lance Whitford - Mar 12, 2001 |
| . . . Re: ABER PE clasps - Neville Lord - Mar 13, 2001 |
| . . . . . . Re: ABER PE clasps - Ted Nichols - Mar 15, 2001 |
| . . . Re: ABER PE clasps [IMG] - Saul Garcia - Mar 13, 2001 |
| . . . . . . Re: ABER PE clasps - - Mar 13, 2001 |
| . . . Re: ABER PE clasps - Bruce Leese - Mar 13, 2001 |
| . . . Re: ABER PE clasps - Friedrich Klett - Mar 14, 2001 |
| . . . Re: ABER PE clasps - Jean-Baptiste Verlhac - Mar 15, 2001 |
| . . . . . . Thanks to all those who repsonded N/T - - Mar 15, 2001 |
| . . . . . . . . . Re: Thanks to all those who repsonded N/T - Paul Owen - Mar 15, 2001 |
| . . . . . . . . . . . . Re: Thanks to all those who repsonded N/T - Lance Whitford - Mar 16, 2001 |
| . . . . . . . . . . . . . . . Re: Thanks to all those who repsonded N/T - Paul A. Owen - Mar 16, 2001 |
|
|
