|
|
Forums - Modelling / Kits |
The kits forum is for the discussion of model kits. Typically questions on availability or certain subjects and quality of existing kits are posted here. Short reviews are good here too. |
| Topics | 1212 |
| Messages | 7398 |
|
|
| Subject: | AFV Club Sturmtiger notes |  |
| Date: | Sep 22, 2007 |
| From: | steve campbell | |
G'day all,
Just a few notes on the kit if your building it.
Step-14 (part 1)
If you glue part SC17 to the breach you cant insert the assembled mortar in through the front as shown in step-16 (the diagram in step-16 shows part SC17, elevation gear rack?, not in place.
Don't despair if, like me, you've glued it on as the mortar will go through the backside better and without damage to the rack.
Step-14 (part 2)
Part SC21 glues onto the breach block to the left of the frame that part SC19 sits in (there was a lot of flash on mine). No mention of part SC21 or it's location is in the instructions but the part can be clearly seen in on-line photos of the rear of the mortar.
Step-19
Part SC30 is glued to either SD40 or SD41 and SD10 (the instruction drawing shows SC30 but not the part number).
Good luck and enjoy the kit (and the hobby :)), steve. |
| |
|
|
|
