|
|
Forums - Modelling / Painting |
The painting forum is for the discussion of techniques on the painting, decalling and weathering phases of AFV modelling and the tools and materials used. |
| Topics | 1382 |
| Messages | 7062 |
|
|
| Subject: | Denatured alcohol |  |
| Date: | May 26, 2006 |
| From: | Mark Ford | |
Paul,
A trick I learned several years ago with this stuff...using the 500 or 1000 surfacer to fill seams or small gaps. Wait several hours for the Surfacer to dry then take a cotton swab (Q-tip for ears, make-up, etc) soaked in denatured alcohol and "work" the area to remove the excess. For some reason (don't know why) the alcohol works to remove the Surfacer. I have gotten very clean seams with this method.
HTH,
Mark Ford |
| |
|
|
|
