|
|
Forums - Modelling / Painting |
The painting forum is for the discussion of techniques on the painting, decalling and weathering phases of AFV modelling and the tools and materials used. |
| Topics | 1364 |
| Messages | 6908 |
|
|
| Subject: | Re: Paasche H: Which nozzle&needle to use? |  |
| Date: | Mar 6, 2007 |
| From: | Mike Gardella | |
First off, you have a nice reliable airbrush. Good luck with it. As for the 3 types of head assemblies, as I recall the H1 is a fine head, H3 is medium and H5 is heavy. You can use any and all of them to spray Tamiya Acrylics. Generally you can use the H3 medium head for general painting, namely base coats. You will use the H1 head for finer lines. I recommend a 50/50 mix of paint to thinner for general painting and you can adjust your compressor to about 20 - 25 psi. Unfortunately I don't know the equivalent bar. For finer spraying you can increase the amount of thinner and reduce the pressure in your compressor. Hope this helps.
Mike |
| |
|
|
 | Paasche H: Which nozzle&needle to use? - A.J. Mansour - Mar 6, 2007 |
| . . . Re: Paasche H: Which nozzle&needle to use? - Mike Gardella - Mar 6, 2007 |
| . . . . . . Re: Paasche H: Which nozzle&needle to use? - A.J. Mansour - Mar 6, 2007 |
| . . . . . . . . . Re: Paasche H: Which nozzle&needle to use? - Blair - Mar 6, 2007 |
| . . . . . . Re: Paasche H: Which nozzle&needle to use? - Matt Riesmeyer - Mar 6, 2007 |
| . . . . . . . . . MYSTERY SOLVED - THANKS MATT! - aegingo - Mar 6, 2007 |
| . . . . . . . . . . . . Re: MYSTERY SOLVED - THANKS MATT! - Matt Riesmeyer - Mar 6, 2007 |
| . . . . . . . . . . . . . . . Re: MYSTERY SOLVED - THANKS MATT! - A.J. Mansour - Mar 7, 2007 |
| . . . . . . . . . . . . . . . . . . Re: MYSTERY SOLVED - THANKS MATT! [IMG] - Eric Scurlock - Mar 8, 2007 |
| . . . . . . . . . . . . . . . . . . . . . Re: MYSTERY SOLVED - THANKS MATT! - A.J. Mansour - Mar 9, 2007 |
|
|
