|
|
Forums - Site / Build Logs |
Messages in this Build Logs forum are automatically posted when new Build Logs or Chapters are added. Other modellers can then comment on them. Refer to the Build Logs section for more information. |
|
|
| Subject: | [Chapter] Chapter 3 - Turret Correction - step 1 |  |
| Date: | Oct 10, 2003 |
| From: | Leo Lee | |
Chapter 3 - Turret Correction - step 1
First I rework the TOGS housing on the turret. The front panel, part D24 is widen by gluing 2 small plastic strips to both side. Then used a new X-acto blade to cut out the tapering shape. Notice I lowered the opening by 2mm, by using some epoxy to fill to upper part of the opening, and enlarge it at the bottom. Then I cut lines on side panels D22 and D23 along the red line, and bend it to accommodate the bigger front panel. |
 |
| |
|
|
|
